How To Change Password Ip Camera
Contentsouth
1. JNVR..................................................................... four
1.one. Introduction ....................................................... 4
1.2. Features ........................................................... four
1.iii. Requirements ....................................................... 4
ii. JNVR Systegrand and Functions ................................................ half-dozen
two.1. Interfaces and Menus ............................................... 6
2.2. Zero Touch IPC Connection .......................................... 7
2.3. Device Management .................................................. viii
2.3.1. Search and Add ............................................... 8
2.three.2. Add Camera Manually .......................................... 9
ii.iii.iii. Remove Camera ............................................... x
2.3.four. Modify Channel .............................................. 10
2.3.five. Channefifty Condition .............................................. 12
2.three.6. Set Auto IP ................................................. 13
2.four. JNVR Settings ..................................................... 14
2.iv.1. Channel Setting ............................................. 14
2.4.2. Record Setting .............................................. 16
2.4.three. Alarm Input and Alarm Output ................................ 17
2.4.iv. Warning E-mail ................................................ nineteen
2.4.5. User Thousandanagement ............................................. 21
two.4.six. System Setting .............................................. 22
two.v. Recording ......................................................... 24
2.5.1. Manual Recording ............................................ 24
2.5.2. Scheduled Recording ......................................... 24
2.5.3. Playback .................................................... 25
2.half dozen. More Functions .................................................... 26
2.half dozen.1. Snapshot .................................................... 26
2.six.2. Organization logs ................................................. 26
2.6.iii. Warning-Map ................................................... 27
2.half-dozen.4. Bootupengagement Tool ............................................. 28
3. Photographic camera Remote Settings .................................................. xxx
iii.one. System ............................................................ 30
3.1.1. Organisation Setting .............................................. 30
iii.one.two. Storage ..................................................... 31
3.1.3. User Setting ................................................ 32
3.i.4. Maintenance ................................................. 34
3.1.5. Logs ........................................................ 36
3.2. Stream ............................................................ 36
iii.ii.1. Video ....................................................... 37
3.2.2. Audio ....................................................... 38
three.two.three. Region Comprehend (Privacy Mask) ................................. 39
three.2.4. Prototype ....................................................... 40
3.three. Alarm ............................................................. 43
3.3.one. Move Detect ............................................... 43
three.3.2. Warning-In .................................................... 44
three.3.3. Warning Parameters ............................................ 45
3.iii.4. Scheduled Capture ........................................... 46
3.four. Network ........................................................... 46
3.four.one. Ethernet .................................................... 47
3.4.2. PPPOE ....................................................... 47
3.4.iii. WIFI ........................................................ 47
iii.5. PTZ ............................................................... 49
three.5.ane. Preset ...................................................... 49
3.5.2. Patrol ...................................................... 50
three.5.3. Path and Spotter .............................................. 50
3.v.4. Browse ........................................................ 51
iii.5.v. Assistance ...................................................... 52
3.five.6. RS-485 ...................................................... 52
3.5.7. RS232 ....................................................... 53
three.6. IVA ............................................................... 54
3.6.1. Regional .................................................... 54
iii.six.2. Cordon ...................................................... 54
three.vi.three. Warning out ................................................... 56
one. JNVR
1.one. Introduction
JNVR is a video surveillance organization for Windows® PC, developed by Jovision. With
stable CloudSEE® network transmission technology, efficient audio and video
coding system and image display engineering science, JNVR can provide smooth HD photographic camera
flick. This software can wor1000 perfectly with Jovision IP cameras, it tin can also
connect IP cameras from other company through ONVIF protocol.
1.2. Features
1. Device Management: Jovision IP camerasouthward, ONVIF IP cameras supported;
2. Screen Layout: Channel sorting, channel pop-up, multiple mondayitors display;
3. Recording: Regular record, scheduled record, alarm record with mp4 standard;
four. Video Adjust: Stream, bitrate, fps, video bright, video dissimilarity adjustment
supported;
five. Warning Role: Warning record, warning due southnapshot, alarm sound, alarm E-mail;
half dozen. Playback: Time line, fast play, snapshot, video editing supported;
seven. Remote Connection: Connect cameras with CloudSEE technology.
1.3. Requirements
Operating system: Windows XP/vii/8/viii.1/x
Recommended Requirements:
*: The difficult disk capacity is calculated for 10 days' record storage.
Minimum Requirements:
2. JNVR System and Functions
2.1. Interfaces and Menus
Primary Interface:
Function Card:
Right-Click Menu:
Start/Stop channel recording
Take a snapshot of this channel
Send this channel to second monitor if available
Open camera remote settings
Use PTZ function (For PTZ camera only)
Change channel parameters
Remove this channel and disconnect theast camera
Set E-mail sender information
Computer network information
Hide/show function menus automatically
Hibernate/show function menudue south manually
2.2. Naught Touch IPC Connection
Make sure all the IP cameras are installed and connected properly, then run JNVR,
JNVR will securvation and connect IP cameras automatically in LAN for the first-time-
use or there is no camera added befordue east. As shown beneath.
2.3. Device Management
All the IP cameras in 50AN can be searched added, deleted or edited here.
2.3.one. Search and Add together
one. Run JNVR, click "Devices" icon to open IP camera management page.
two. Click "Search More than"to search for all the cameras in LAN, and photographic camera
data including camera proper noun, CloudSEE ID, IP accost, Channel status
are listed. As is shown below.
3. Select one photographic camera and click > to add together this camera into JNVR, you tin also
apply >> to add all the cameras in the searching list.
Note:
JNVR wilfifty machinematically connect the added device with default network camera
account (Username: abc Countersign: 123), if y'all have changed thursdaye camera access
password, the device cannot be connect and show "
Wrong Password
" in
Channel
Status
. Double click the camera name, and input right username and password,
click OK, the photographic camera will be connected automatically.
2.3.two. Add Camera Manually
The previous part
two.3.one Search and Add
described how to search and add cameras
in the aforementioned LAN. If the camera is not in the same LAN with your PC and has been
continued to Internet, yous can manually add this camera with CloudSEE ID.
Click "Manually add", input the CloudSEE ID, username and password, click
"OK", then the camera volition be added.
2.three.3. Remove Photographic camera
Select 1 added camera and click < to remove the camera from the connected list.
Click << to remove all the connected camera.
ii.3.4. Modify Channel
1. Select 1 added photographic camera and correct click in the continued list, click "Modify
Channel".
2. The device parameters dialog box will announced, you lot tin can input camera access
account hither.
3. Click "Networchiliad" to open network preparetings dialog box. You cannot change
network parameters if DHCP function isouth enabled, all the parameters areastward from
router. If you disabled DHCP function , you tin alter camera'due south IP, minquire,
gateway, or DNS according to your needs.
2.3.5. Channel Status
Photographic camera information including network status, Hd stream, SD stream, real-time
video and record. The information tin help y'all to locate the problem and
troubleshoot the proble1000.
Click "Channel Condition" in device management page to view the condition.
Network Status
The camera connection is very good
The photographic camera connection isouth good
The photographic camera connection is swell
Bad connection, need to bank check network
Bad connexion, need to cheque network
The photographic camera has disconnected, need to check network
fault
JNVR is detecting the connection, please wait
JNVR is connecting the camera
The camera has been connected in JNVR
The photographic camera cannot be connected due to incorrect countersign
The camera cannot be continued, troubleshooting is
needed
The camera cannot be displayed, troubleshooting is
Too many clients are connecting this camera, remote
connection limitation is reached, please disconnect
the camera on other clients.
Real-time video is displaying in JNVR
When encounter this information, please effort the
following instructions:
① Remove the camera and add together information technology once more
② Brand sure the connection is practiced.
The video is recording and tin exist checked in playback
When encounter this problem, delight try the following
instructions:
① Enable record function manually
② Make sure the hard disk is well connected and can
work.
JNVR is detecting the status, please await
2.3.six. Ready Motorcar IP
This part can solve IP conflict and IP error by re-assigning IP for all the
cameras. If there is IP conflict or IP error problem, delight click "Set up AutoIP"
in device management folio, JNVR will prompt that "Are you certain to set AutoIP
for all Channels?", click OK to confirm.
two.4. JNVR Settings
ii.4.one. Channel Setting
Click "Setting" icon in function menu and setting page will appear. Select
"Channel Setting" tab. You tin can access video stream settings, OSD settings,
privacy mask function, pop-upward function, etc.
Please select a channel in channel list on the left beginning, and so southet the
parameters for the channel. Y'all tin can use different settings for each channel.
Used for remote connection
Used for mobileastward phone app
Resolution is the width and height
dimensions of the camera imaging in
pixels. A higher display resolution in a
display of the aforementioned size ways that
displayed content appears sharper.
Users tin set
the resolution
for each stream
and each
aqueduct.
Frame rate, also known every bit frame frequency,
is the frequency (rate) at which an
imaging device displays consecutiveast images
called frames. The higher frame rate is,
the more than consecutive video becomes.
Users can set up
the FPS for each
stream and each
aqueduct.
Bitrate is the average number of bits per
second passing between camera and JNVR. A
higher bitrate means that the stream
quality is better but which volition use more
bandwidth and storage southwardpace.
the FPS for each
stream and each
channel.
Existent-fourth dimension video will be displayed in principal
interface when enabled. Otherwise, the
channel will display " Connected" only.
The record and
snapshot
function can
piece of work ordinarily
whether preview
is enabled or
not.
This channel won't pop-up in new window
when using pop-up function if enabled.
Privacy mask enables you to cover sure
areas on the live video to prevent certain
spots in the surveillance surface area from existence
live viewed and recorded.
Click and drag the mouse in the picture show to
draw the mask area. You are immune to
depict upwardly to 4 areas onorth the due southame paradigm.
Release left mouse push to finish
drawing and right-click to abolish the
areas. Click Salve to save the settings.
Check the
checkbox of
Enable Masking
to enable this.
If Eastward-PTZ is enabled, y'all can select a existent-
time video channel and apply mouse cycle to
zoom in the video. Use left button to drag
the picture to run across other area.
Camera time will be synchronized with JNVR
time when connected in JNVR if this
checkbox is enabled.
Use original width to acme ratio video
for real-time display and recording.
You lot tin define a proper noun for the camera which
will be displayed on the video.
Modify the position of OSD displaying,
at that place are 5 modernes: upward-left, upwardly-right,
down-left, down-right, and hide OSD.
Reset all the settings to default.
Utilise electric current channel settings to all
channels
2.4.two. Tape Setting
Click "Setting" icon in office menu and setting folio wil50 appear. Select
"Alarm in" tab. Yous can choose record partition, use scheduled recording
mode, etc.
Delight select a channel in channel list on the left first, and then due southet the
parameters for the channel. You lot tin can use different settings for each channel.
Choose the partitions for thursdayis
aqueduct in which fiveideo files will
exist stored.
Partition C is
unselected by default,
and divisions with
less than 5GB complimentary
space is non
selectable.
JNVR will overwrite or stop
recording when the free space of
a division is less than the value
you set
Recording files are packed every
thirty minutes past default
Y'all can cull 10~60
minutes as packing
fourth dimension
Overwrite Previous
Records
When there is no available disk
space, JNVR will overwrite
Stop Recording and
Remind user
When there is no available deejay
space, JNVR will terminate recording
and prompt.
Enable Scheduled
Recording
Set a fourth dimension menstruation during which the
channel will record.
Reset all the settingdue south to default.
Utilise electric current channel settings to
all channels
2.4.3. Alarm Input and Alarm Output
This department explains how to configure JNVR to answer to alarm events, includinthou
motion detection, video lost. These events tin can trigger the linkage methods, such
every bit start record, audio alarm, etc.
Warning input
Click "Setting" icon in function menu and setting folio wil50 appear. Select
"Alert in" tab. You can set even that can trigger the alar1000.
Delight select a aqueduct in channel list on the left get-go, and then set the
parameters for the channel. You lot can use different settings for each channel.
When enabled, if the real time video lost
or asunder, alarm will be triggered.
And JNVR volition response as alarm output
Motion detection detects the moving
objects in the configured surveillance
surface area, and a series of deportment can be taken
when the alert is triggered.
In order to detect
the moving objects
accurately and
reduce the false
alarm charge per unit, please
select detection
area and
sensitivity.
Set the sensitivity of move detection,
drag the slider to set proper value, the
higher number is, the more sensitive
detection is.
Click and drag the mouse in the picture to
draw the detection area. You are immune
to depict up to 4 areas on the same image.
Release left mouse button to finish drawinthousand
and correct-click to cancel the areas. Click
Salvage to relieve the settings.
Check the checkbox
of Enable Motion
Detecting to enable
this button.
Reset all the settings to default.
Apply current channel settings to all
channels
Alarm output
Click "Settinm" icon in function menu and setting page will appear. Select
"Alarm out" tab. Checyard the checkbox to select the linkage method taken for
the channel alarm.
Please select a channel in channel list on the left commencement, and then set the
parameters for the channel. You lot tin can use different settings for each channel.
Set a time the alarm will last for when alarm is
triggered, new alarm volition non be triggered until
previous alarm is finished.
JNVR volition start recording when alarm is triggeruby.
Snapshot When Warning
Detected
JNVR will snapshot when alarm is triggered.
Alarming When Warning
Detected
JNVR will play warning and sound when alarm is triggered.
E-Map Popular-up When
Alarm Detected
JNVR will pop upwardly e-map when alert is triggered.
Reset all the settings to default.
Apply current aqueduct settings to all channels
two.iv.4. Alarm Electronic mail
At that place are two methods to send an alarm E-mail, JNVR alarm E-mail and IP photographic camera
alarm E-mail. JNVR alarm E-mail function is based onorthward the JNVR software, when
received alarm signal from IP photographic camera, JNVR tin can send an alert E-mail to the
receiver to be notified. IP photographic camera alarm E-postal service is based on the embedded Linux
system in the camera, the camera can send alert E-postal service if alarm is triggered.
This section describes how to gear up JNVR warning Electronic mail, you can refer to
3.3.3.
Alarm Parameters
for IP camera warning E-mail settings.
JNVR can exist configured to send an Email northotification to all designated receivers
if an alarm event is detected, e.one thousand., motion detection event, video loss, etc.
Click "Setting" icon in function menu and setting folio wil50 announced. Select
"E- mail Alert Setting" tab.
Delight select a channel in aqueduct list on the left first, and so set up the
parameters for the channel. Yous tin use different settings for each channel.
Sending Email When
Alarm Detected
Enable alarm e-mail function
The email address of user to be notified.
The interval refers to the time between two actions of
sending electronic mails
Click this push to test if the e-mail service parameters work
well, JNVR will transport a exam electronic mail to the electronic mail address
of user to be notified.
Reset all the settings to default.
Apply current aqueduct settings to all channels
Note:
Electronic mail sender parameterdue south must be prepare before using JNVR alarm E-mail function.
Click E-mail icon in the lesser right corner, East-mail information dialog box will
appear. Please input the Due east-mail address and password of the sender.
two.iv.5. User Management
Click "Settink" icon in part menu and setting page will appear. Select
"User Management" tab. Yous can create new user, edit current user, command
user permissions for JNVR, etc.
Note:
This user management is for JNVR users only, if yous want to manage IP camara
users, please refer to
3.one.three. User Setting
All the JNVR users are listed here, choose one user to edit.
Input new username to beastward created
Input password for the new user; Or you can select an existing
user and then input new password, click OK to change countersign.
After input new username and password, click "Add together" to create
new user
Select an existing user and click "Delete" to delete this
account
Users with this permission can admission device management
function, such as adding, deleting or editing cameras.
Users with this permission can access JNVR settings, such as
channel setting, record setting, alarm in/out, user
management, etc.
Users with thisouthward permission can enable/disable tape.
Users with this permission can accesdue south playback functions and
controls
Users with this permission can change screen layout.
Users with this permission can alter image settings.
Users with this permission can access PTZ function.
Users with this permission can manage snapshots.
Users with this permission tin enable sound monitoring.
Users with this permission tin access IP photographic camera remote
settings.
Users with this permission can exit the JNVR software.
Remote Privilege (For some models merely) refer to
User tin can only view and access specified channe50 remotely
Users with thisouth permission can enable/disable record.
Users with this permission can access playback functions and
controls
Users with this permission can access PTZ function.
ii.four.half dozen. System Setting
Click "Settink" icon in function menu and setting page will appear. Select
"System" tab. You can access advances JNVR settings.
The interval refers to the time betwixt two channels when
enable sequenceastward display (Channels display in turn).
You can set a fourth dimension for the camera to reboot
automatically.
JNVR volition be locked if there is no operation for a certain
time, Users need to unlick JNVR with correct password.
Shutdown the PC
When Exiting System
Windows will power off afterwards exiting JNVR.
Disable CTRL+ALT+DEL command. Support Windows 2000/XP
merely.
Meliorate video fluency onorthward some old PC.
You can add and connect cameras out of the LAN by CloudSEE
ID.
Smooth style on the
Internet
JNVR will adjust the stream of cameras according to the
network condition. This may lower video quality.
Enable NVSIP protocol to amend the compatibility with
cameras from other compwhatsoever.
2.5. Recording
ii.5.i. Manual Recording
Right click on the existent time video, select "Beginning Recording" to start recording
for this channel; Click "Record All" icon to showtime record for all the channels.
If the channel is recording, at that place will be a recording icon showing in the
aqueduct window. You can employ "Stop Recording" in correct click menu or "Finish All
Recording" in office menu to stop current record task.
two.five.2. Scheduled Recording
Click "Setting" icon – Tape Setting – Enable Scheduled Recording, check
the checkbox and set up a menses to start channel recording.
2.5.3. Playback
i. Click "Playback" icon to open playb ack interface.
2. Cull tape date and check the channel number to beginning playback.
Apply operations to
all channels
four/9/sixteen CH playback screen
layout supported.
Hide Console/
Minimize/ Closdue east
i/16X, 1/8X, i/4X, one/2X,
1X, 2X, 4X, 8X, 16X Play
speed.
2.6. More than Functions
2.6.1. Snapshot
Select a real time video channel and right click, select "Snapshot" or click
the "Snapshot" icon in function menu to salve electric current frame as picture.
You lot tin can check the snapshots by clicking [More function iconorth - Snapshot Viewer],
the snapshot 5iewer window volition appear.
Cull the engagement and channel you want to check and click "Search", snapshots
volition be listed on the right. Double click to open the image.
2.6.2. System logs
JNVR logs or southwardoftware information tin be found in [More Function- System logs].
Event logs record events taking place in the execution of JNVR in society to
provide an audit trail that can be used to understand the activity of the arrangement
and to diagnoseast troubles.
two.6.3. Alert-Map
You tin can upload .jpeg or .bmp paradigm as Alert-map, prepare camera position and bear witness
camera video inorthward [More than Function- Warning-Map].
1. In alert-map page, right click and select "Load E-map" to select an image
every bit map, it can be a traditional map or a floor plan.
2. There will be several eye icons if you lot have cameras connected, an middle icon
indicates a camera. Right click on the icon and select "Show Video" to play
live video on the map.
three. You can drag the icon and video window air-conditioningcording to the real position of the
camera on the map.
2.six.iv. Bootupdate Tool
Bootupdate is a tool to wink camera software, users can use this tool to
reset/recover a camera.
[More Function- Bootupdate as welll], Select the folder containing update files for
IPC past clicking "browsdue east".
Power on the IPC and make sure the LAN network connectiodue north is fine, never listen
even if the IPC has non been listed.
Click "Start Updating" first, and and so,
power off the IPC and power on again.
The tool will search and list the camera
and starting time transmitting and updating. You can see the progresdue south in the programme.
Sending data Updating
When the program shows that update finished, delight disconnect the network of
IPC or close the tool, otherwise, the IPC may update again after reboot
iii. Camera Remote Settings
As an independent device with embedded Linux, a network camera can be accessed
and configured by JNVR. "Remote Setting" function can only configure 1
selected network photographic camera at a fourth dimension, including System, Stream, Warning, Network, PTZ,
IVA management, every bit shown below.
Remote Setting Function Panel
3.1. Due southystem
3.one.1. Organisation Setting
[Remote Settings- System- Organization Settings]. Camera name, OSD settings, language,
time and appointment can be set hither.
The name of the device can be changed here, which will display
on live video window.
The factory model of the photographic camera.
Log language can be changed here. The camera 1000enu language is
depending on the JNVR language.
Port number for CloudSEE service, Exercise Non change unless in that location
is port conflict with other device.
Alter the position of OSD information: left-top, left-bottoone thousand,
correct-top, right-bottom or hide.
Change the position of OSD time: left-height, left-bottom, right-
pinnacle, correct-bottom or hellode.
Device ID is used for remote connection if the device is
online.
Generate CloudEncounter QR code, which can exist used to add this
camera by browsening QR code in CloudSEDue east app. (For some model
only)
Yous can input a nickname for the camera.
Utilize large OSD if the camera is in high resolution.
Port number for photographic camera connection service, cannot exist changed.
Camera will synchronize time with NTP server automatically.
The default NTP server is almost always a adept option, but if
you adopt to use another NTP server, you tin can enter it here.
The menses between two time-synchronization events.
Set up the format of engagement and fourth dimension.
Register product on server, if the camera is connected just due northot
online.
Restore default arrangement settings.
three.1.ii. Storage
[Remote Settings- System- Storage]. This function is for cameras with storage
card, users can manage storage here.
Y'all tin select the storhistoric period card installed in the camera.
You can check the statusouthward of the storage card.
The storage ingermination is shown here.
Y'all tin can choose record grandode for the camera.
Recording files are packed every 10 minutes by default
3.one.3. User Setting
Every bit an independent Linux organisation embedded in it, a camera tin can be only accessed past
right business relationship. You can manage users for the camera in [Remote Settings- Arrangement-
User Setting].
Note:
- The build-in account
admin
cannot exist deleted. If the build-in air conditioningcount
admin
has not been modified, y'all can login with any username and password.
- The maximum number of users is 13.
- You should change this default password to better protect confronting security
risks, such equally the unauthorized accesdue south by others to the product that may
prevent the product from performance properly and/or lead to other
undesirable consequences.
Click "Add", input u.s.a.ername and password, select user group
and click OK to create new user.
Select a user in the list, click modify to change countersign.
There are three groups built in the system, to which you can
assign users.
Administrator
: Administrators have permissions to admission all
the functions and operations.
Common User
: Common users can access parts of the functions,
system level operations such every bit rebooting, performing system
recovery, setting network, etc. are due northot permitted.
Guest
: Guests can but watch the live video without whatsoever other
permissions.
Select a user, click this button to delete.
3.ane.4. Maintenance
Yous tin can update or reset the camera in [Remote Settings- System- Maintenance].
Note:
Inappropriate maintenance operations would do damage to the camera or crusade
photographic camera system fault, delight contact with your local dealer for more data.
The device will check for available software updates on
update server via Internet.
The device will update with the update files on the calculator
in the same local network. (Strongly recommended)
When "File Update" is selected, utilize this justton to browse
and select the managing directory containing update files.
Commencement the selected update process.
Prepare a fourth dimension to reboot the device.
Indicates the progress of updating.
Detect the netpiece of work connections to help to locate connection
trouble
Erase all settings and data, restore the deviceast to its
Spider web Update
one. Connect the camera westwardith our remote client southoftware, select the channel of
the camera you desire to update, right click on the alive video, and select
Remote
Settings- System-Maintenance
, the maintenance dialog appears.
2. The default update mode is "Web Update", select update server from the
2nd drop-down carte du jour.
3. Click "Update begin", System asks for confirmation of update, click
"Yes".
four. Update begins, the progress bar will run twice, ane indicates downloading
progress and another indicates burninyard progress.
5. After downloading and burning, the update completes, System will ask for
confirmation of restarting, click Yes to confirm.
6. The device will balanceart and connect automatically.
File Update
i. Connect the camera with our remote client software, select the channel of
the camera you want to update, right click on the live video, and select
Remote
Settings- System-Maintenance
, the maintenance dialog appears.
2. The default update grandode is "Spider web Update", select "File Update" from the
drop-downwards menu, and click
Select
to browse and select the directory containing
update files.
3. So click "Update begin", systek will stfine art burning progress. If you
choose wrong update file directory, System wil50 prompt that "Open upwardsdate file
failed, please check if the update file exists ", you demand to bank check the update
files and select correct files. Systechiliad asks for confirmation of update, click
"Yes".
4. Update begins, the progress bar will run twice, one indicates downloading
progress and another indicates burning progress.
5. Subsequently downloading and burning, the update completes, System will ask for
confirmation of restarting, click Yes to confirm.
half-dozen. The device will balancefine art and connect automatically.
three.1.five. Logs
Event logs record events taking place in the execution of the system in society to
provide an audit trail that can be used to sympathise the activity of the system
and to diagnose problems.
Listing the logs by page or engagement.
Relieve the Logs as txt file on the computer.
3.2. Stream
Our network camera supports duel stream or triple stream for different usage:
Video Stream 1
: Besides called
chief stream
or
recording stream
, used for
recording, and if there is no more than 4 channels displaying on JNVR, this
stream volition be displayed.
Video Stream 2
: Also chosen
sub-stream
, used for live view if more than iv channels
displaying on JNVR.
Mobile Phone Stream
: Also called
Net-stream
, used for displaying on mobile
phones which costs the least network bandwidth. Phone app tin can choose proper
steamer according to theast network status on latest CloudSEE app,
3.2.1. Video
Resolution is the width and height dimensions of the camera
imaging in pixels. A higher display resolution in a brandish
of the same size means that displayed content appears
sharper.
Frame charge per unit, also known equally frame frequency, is the frequency
(rate) at which an imaging device displays consecutive
images chosen frames. The college framdue east rate is, the more
consecutive half dozendeo becomes.
Bitrate is the average number of bits per second passing
between camera and JNVR or NVR. A higher bitrate means that
the stream quality is better but which will use more
bandwidth and storage space.
The quality of the video.
VBR: Variable Chip Rate, VBR files vary theast amount of output
data per time segment. VBR allows a higher fleckrate (and
therefore requires more storage space) to exist allocated to
the more than complex segments of video files while less space is
allocated to less complex segments.
CBR: Abiding Fleck Rate, CBR means that theastward charge per unit at which a
codec'south output data should be eatd is constant. Lower
bitrate is useful for streaming multimedia content on
limited capacity channels since it is the maximum chip rate
that matters, simply it cannot allocate enough data for circuitous
sections. Higher bitrate volition provide enough bits for the
unabridged coding process, though the sizdue east of the file at the
terminate would be proportionmarry larger.
Regions of interest, select an expanse to focus on the scene,
which may lower the quality of the united nationsselected area.
Restore default system settings.
iii.ii.ii. Sound
1. Connect the pickups or microphone to the photographic camera, and power on all the devices.
2. Connect the photographic camera with JNVR, and on the channel click:
Right click carte du jour-
Remote setting- Stream- Audio
, the audio setting dialog appears.
three. Select "
Sound-In Enable
" to enable audio encoding role. If the check-
box is not selected, there will no and thenund even if audio-in device is connected.
iv. Select proper
Audio Encode Type
from the drop-down chiliadenu, which should be the
same as connected NVR if y'all apply NVR.
There are five audio enlawmaking types: PCM, G117A, G117U, G726 40K, ADPCM.
5. In JNVR, right click on the live view channel, click audio icon to monitor
the sound from microphone; On NVR, select the live window to monitor the audio.
iii.2.iii. Region Cover (Privacy Mask)
This function allows you to cover an area with a black cake, both in live view
and recording. Supports up to 4 private areas. Drag the mouse and draw a rectangle
covering on the area you want. Right click on the rectangle to cancel the area.
Enable private Area function.
Get the latest view picture
Restore default organization settings.
3.two.4. Paradigm
Brightness, contrast, saturation, sharpness and other settings nigh image tin
adapted and configured here.
Gear up the difference in luminance or color that makes
display distinguishable.
Gear up the brightness of the video.
Saturation is the colorfulness of a color relative to its
ain brightness. A highly saturation is vivid and intense,
while a less southwardaturation appears more muted, closer to
gray.
Set up the subjective perception of sharpness that is related
to the border contrast of the image.
Light Intensity
(sensitivity)
Set the sensitivity of the photo resistance. (For some
models but)
Support Indoor, Outdoor, Default, Soft.
Select the moderne of solar day-night switching, support Auto,
Ever Color, E'er Black/White, Timeastward Colour.
Back up rotate 0°, 90°, eighteen0°, 270°.
Set the period of exposure, the camera volition advertbut
automatically in the range. If the is ability frequency
interference, you tin adjust exposure time to avoid it.
AWB can compensate for the slight color differences in
different blazonsouth of light, or make the colors warmer or
cooler to match the intconcluded mood of your video.
Enable this function to meliorate the northwardight vision effect.
With night self-adaption, camera can adjust night vision
effect according to the object.
Wide Dynamic Range: With WDR, a camera can record greater
scene details, from shadows to highlights than normal.
Show the mirror image of the video, in which the correct
side of the original object appears odue north the left and the
left side appears on theastward right
Make the picture upside downwardly.
Select the function in fog weather to improve the clarity.
Restore default organization settings.
3.3. Alarm
3.three.one. Move Notice
Motion detection detects the moving objectsouth in the configured surveillance area,
and a series of deportment tin be taken when the alert is triggered.
Steps
i. Highlight Due eastnable check-box to enable total-screen motility detect.
2. Click and drag the mouse on the live video to draw a movement detection expanse,
you can choose four areas at almost for 1 aqueduct. Sensitivity can also be set hither.
3. Click OK to save the settings.
Enable motion detect function.
Set the sensitivity of motion observe, the higher the
number is, the college southensitive the detection is
Send alarm to JNVR client software connecting the
camera.
Send an electronic mail with alark information to a user or users
when an outcome occurs.
Send warning to VMS server. (CMS is a product of Jovion)
Get the latest view picture showture
Restore default system settings.
three.three.2. Alarm-In
If the camera supports warning-in function, the function tin be configured hither.
Enable Alarm-In function.
Transport alarm to customer software connecting the camera.
Send an e-mail with alarchiliad information to a user or users
when an upshot occurs.
Send alarm to VMS server.
Start recording when alarm-in device is triggered
Set up alarm fashion of the alarm-in device, Normally Open or
Ordinarily Closed.
If selected, the buzzer inside the NVR will buzz when
alarming.
Enable/Disable connected alarm-in device(s).
Restore default organisation settings.
Enable warning function to receive alarm information.
Set the period of sending alarm messages.
Set the duration that one alert lasts.
Input Electronic mail address of the sender.
Input the SMTP server of sending e-mail.
Choose the security protocols for SMTP
Set the interval of sending Due east-mails
Email(s) to receive alarm email
Gear up the IP of VMS server.
Set the port of VMS server.
Send test east-mail to check whether these settings work
fine
Restore default arrangement settings.
iii.three.four. Scheduled Capture
Camera tin can capture video pic and send to specified Email with this function.
iii.four. Network
There are three network connection type: Ethernet, PPPOE and WIFI. You can
choose according to yousr demand.
Note:
- Non all models support these threeastward connection types, the steps are for
reference only.
- You can see network ingermination in whatever connection type configuration page.
- Starting time AP. For wireless camera only. After configuring the network camera
with wireless connection, and the camera are connected with Wi-Fi, the AP
signal will be disabled. Use "Start AP" to enable AP again.
3.4.1. Ethernet
Select "Self- adapting IP" and "DHCP", if your cyberspacework uses dynamic IP.
Unselect "Cocky-adaptin1000 IP" and "DHCP", and input the network data,
if your network uses static IP.
3.four.2. PPPOE
If you utilize PPPOE, yous can input ID and password provided by Internet access provider, click OChiliad to
connect.
3.4.3. WIFI
Some models support Wi-Fi connectedness, click "Search" to scan wireless network,
choose the SSID from the drop-down menu, input the password, and select potency
and security type, click OK to connect.
three.5. PTZ
In the alive view interface, you can use the PTZ control buttons to realize
pan/tilt/zoom command of the camera.
Notation:
- To realizeastward PTZ control, the camera connected to the network must support the
PTZ role or a pan/tilt unit of measurement has been installed to the camera. Delight
properly set the PTZ parameters on RS-485 settings page.
3.five.ane. Preset
In that location are for management arrows, Utilise
to control the view of PTZ camera;
Employ to kickoff rotating horizontally.
Conform the irisouthward of the camera.
Adjust the focu.s.a. of the camera.
Click to clean water on the lens with wipers.
Click to turn on calorie-frees when it is dark.
Conform the speed of pan/tilt motilitys.
Preset number, 1 to 255, support 256 presets in total.
Preset name, which can be modified to exist recognized
easier.
Accommodate the position of the camera viewestward, click this button
to add electric current view position as a preready.
Select a preset, and remove it with this button.
This feature eastnables thursdaye photographic camera to point to a specified
preset scene one thousandanually or when an event takes place. For
the divers preset, you lot tin phone call it at any timeast to the
desired preset scene.
3.5.two. Patrol
Notation:
No less than 2 presets have to be configured before you set a patrol.
All the presets involved in patrol areast listed.
Choose the different paths of patrol.
Patrol duration of the preset.
Add the preset to patrol.
Delete the prefix to patrol.
3.5.three. Path and Watch
Role Introduction:
Path: Set a patrol path manually by using management arrows instead of presets,
organization will refellow member thursdaye path and save it.
Watch: Set a view position and duration to watch the point.
Choose the path you want to edit or use.
Click Tape and ready a patrol path manually by using
management arrows, the path will be stored.
Click Finish to stop pathursday recording and relieve it.
Start selected path patrol.
Add the preset to patro50.
Select the preset used for watching.
Set up the duration of watching.
Fix the speed of scanning
Set left limit manually with directiodue north arrows,
Set right limit manually with direction arrows,
Use preseted various scanning style.
3.5.5. Assist
You lot tin set assist on/off and set up/call/clear a preset in this page.
You tin can also set scheduled patrol hereast.
3.5.half dozen. RS-485
The RS-485 serial port is used to control the PTZ of the camera. The configurin1000
of the PTZ parameters should be done earlier you command the PTZ unit.
Steps:
1. Enter PTZ southwardetting interface.
2. Set the RS-485 parameters and clicyard Save to save the settings. By default,
the Baud Rate is ready as 2400 bps, the Data Bit is 8, the stop bit is i and the
Parity and Flodue west Command is None.
Note:
The Baud Rate, PTZ Protocol and PTZ Address parameters should be exactly the
same equally the PTZ camera parameters.
3.5.7. RS232
Steps:
i. Enter RS-23two Port Setting interface.
ii. Click Salve to salvage the settings.
Annotation:
If you lot want to connect the camera by the RS-232 port, the parametersouthward of the RS-
232 should exist exactly the same with the parameters you configured hereastward.
3.6. 4A
3.half-dozen.1. Regional
Regional, or intrusion detection function detects people, vehicle or other
objects which enter and loiter in a pre-defined virtual region, and some
certain activitys tin can exist taken when the warning is triggered.
Note:
Intrusion detection function varies according to different camera models.
Steps:
1. Enter the Regional Detection settings interface up
ii. Check the checkbox of Enable IVA to enable the function.
3. Select the region from the driblet-practisewn listing for detection settings.
4. Click on thursdaye alive video to specify the four vertexes of the detection
region, and practiseuble-click to complete drawing.
5. Repeat the higher up steps to configurdue east other regions. Up to four regions can be
set. You can click the Clear button to clear all pre-defined regions.
6. Click Salvage to save the settingdue south.
iii.half dozen.ii. Cordon
Cordon, or line crossing detection function detects people, vehicle or other
objects which cross a pre-defined virtual line, and some sure actions can be
taken when the alert is triggered.
Notation:
Line crossing detection function varies according to dissimilar camera
models.
Steps:
one. Enter the Cordon settings interface.
2. Check the checkbox of Enable IVA to enable the function.
3. Click-and-drag the 50ine, and you can locate information technology on the live video asouthward desired.
4. Select the direction for line crossing detection. And you can select the
directions as A<->B, A ->B, and B->A.
A<->B: Merely the arrow on the B side shows; when an object going across the
plane with both directions can exist detected and alarms are triggered.
A->B: Only the object crossing thursdaye configured line from the A side to the B
side can be detected.
B->A: Only the object crossing thursdayeast configured line from the B side to the A
side tin can be detected.
5. Repeat the above steps to configureast other lines. Up to 4 lines can be set.
You can click the Articulate button to clear all pre-divers lines.
6. Click Relieve to save the settings.
Set the sensitivity of detecting moving objects. The
higher the value is, the more easily the movement can exist
detected.
The value of the threshold defines theastward grey-scale of the
object which can trigger the alarm. Westhen the threshold
is high, the object can trigger the alarm easier.
The fourth dimension of theastward object stay in the region, after which
can trigger thursdaye alarm. If you set the value as 0, alarm
is triggered immediately subsequently the object entering the
region.
Display the cordon, or line crossing detection line on
live video.
Flicker the intrusion detection expanse on alive video when
warning is triggered.
Make the object that triggered the alarm.
Make all movink object in the video.
Outset recordinchiliad when 4A alarm is triggered
Ship alert to continued alert device.
Send alarm to client software connecting the camera.
Send an email with alaryard data to a user or users
when an event occurs.
Restore default system settings.
Source: https://usermanual.wiki/Document/jovisionipcamerajnvrcamerausermanual.2028505634/html
Posted by: churchwolleationg1967.blogspot.com
0 Response to "How To Change Password Ip Camera"
Post a Comment